MM-Release
agent prevents the adhesion between PolymerMetals and the surface
of the base material.
In some cases
the user of a PolymerMetal wants to avoid the adhesion of the
PolymerMetal on certain places of the work piece's surface. Here
we recommend the use of MM-Release agent.
Simply apply a thin layer of MM-Release agent on the concerned surfaces
and polish after a short drying time. PolymerMetals do not bond on
surfaces, which were treated with MM-Release agent.
Before the usage of MM-Release agent the tin's content must be shaken
well. MM-Release agent can be applied by brush.
Prod-#
|
Product
name |
Unit
|
14
|
MM-Release
agent, liquid |
100
ml
|
Detailed information
can be received from our technical data sheets, which are available
for every product and which can be requested by using the contact form.
Possible
product applications can be found at Worldwide
repairs.
MultiMetall® • PolymerMetall® • Ceramium® • Molymetall® • Sealium® • XETEX® • the
MetalExistenceCompany®
