MultiMetall supplies the following products of the MM-metal S-"product group":

MM-metal SS-steel
MM-metal SS-iron
MM-metal SS-aluminium
MM-metal SS-copper
MM-metal SS-bronze

PolymerMetals of the S-basis offer good technical data at a rapid hardening. By altering the mixing ratio of metal powder to hardener, the user is able to determine the application consistency of the mixed components from liquid to pasty. PolymerMetals of the S-basis are used i.e. to remove bubbles in cast parts or for quick repairs. MM-metal S is available for steel, iron, aluminium, copper and bronze.

PolymerMetals of the S-basis are two-component-products which can be used with Hardener S8 or Hardener S15. The pot life and full curing time of Hardener S8 is shorter than of Hardener S15.

Prod-#	Product name	Unit
101	MM-metal S-steel, powdery	1000 g
102	MM-metal S-iron, powdery	1000 g
105	MM-metal S-aluminium, powdery	650 g
108	MM-metal S-copper, powdery	1650 g
109	MM-metal S-bronze, powdery	1650 g
147	Hardener S8, liquid	250 g
148	Hardener S15, liquid	250 g

Detailed information can be received from our technical data sheets, which are available for every product and which can be requested by using the contact form.

Possible product applications can be found at Worldwide repairs.

---

=> Product overview

=> Technical Data Sheet

=> To the top

---

MultiMetall® • PolymerMetall® • Ceramium® • Molymetall® • Sealium® • XETEX® • the MetalExistenceCompany®