|
MM-metal
UW
MM-metal UW is a two-component-product, which can be combined either with Hardener UW3 or Hardener UW9 offering different processing times. Two hardener components facilitate an efficient and practise-orientated use. Hardener UW3 is preferred for the first coating when leakages shall be sealed. Hardener UW9 is advantageous at badly accessible repair sites or at excessively high ambient temperatures. MM-metal UW is certified by “Lloyds Register of Shipping”. MM-metal UW has been tested for a longer period at a pressure of 80 bar; result pressure tight.
Special information about a new working method (applied at patent office) for sealing leakages where liquids pour out from systems under pressure can be found at sealing leakages. Detailed information can be received from our technical data sheets, which are available for every product and which can be requested by using the contact form. Possible product applications can be found at Worldwide repairs.
MultiMetall® • PolymerMetall® • Ceramium® • Molymetall® • Sealium® • XETEX® • the MetalExistenceCompany® |
MM-metal
UW is a PolymerMetal with extreme short full curing time. It
is certified for repairs under water or on wet metal surfaces.
Possible application areas of MM-metal UW are the repair of
under water components or the sealing of leaks - also in case
of systems under pressure. It can be processed at ambient temperatures
as low as 0 °C.