Characteristic for this PolymerMetal are the extreme short full curing time and the easy processing. The powdery metal component offers together with the liquid hardener component a corrosion-proof alloy material with high bonding properties. The variable mixing ratio offers application consistencies from pasty to liquid. MM-metal SQ can be used for repairs of components made off any metal or alloy damaged by mechanical or chemical stress or corrosion. We recommend to use a PolymerMetal from the MM-metal SS-”product group” instead of MM-metal SQ in cases where a construction material is required (i.e. for building up rudder bearings, V-grooves/keyways or bearing seatings). MM-metal SQ is a purely repair material.

MM-metal SQ can be used with two different hardeners (Hardener SQ2 or Hardener SQ8), which offer different processing and curing times. Hardener SQ2 is preferred at low temperatures from 5 °C up to minus 30 °C; Hardener SQ8 offers a longer processing time and is suitable for repairs in ambient temperatures from 5 °C onwards.