Logo
Banner
=> German
English
=> Spanish
=> Russian
=> Chinese
=> Persian
Homepage
News
Products
Repair Project
Worldwide Repairs
Technical Reports
MM-Infos
Sealing Leakages
History
Links
Contact
Impressum
Special Website
www.metalexistence.com
(Iron & steel works, transformers, floating roof tanks, ...)

MultiMetall-Produkte
© Copyright 2007 MultiMetall

Technical Reports

Since the development of the PolymerMetals many applications & experiences have been collected in written form. These are now published here with the so -called Technical Reports (TEC) to provide assistance for customers and applicators of our PolmyerMetals for this modern repair technology. The following list can't be sorted according to our common product ranking, because sometimes several products are corresponding to one Technical Report.

All information are available both in German and English language. To receive a Technical Report of the desired language as PDF-file (Icon PDF), click on the corresponding number of the first two columns. The right column informs about the products concerned in the Technical Report. Here can be received further information of the used products by clicking the product names, too.

Fahne (d)

Icon PDF 		Fahne (e)

Icon PDF
Used products
001 001 Wear behaviour of polymer materials Ceramium, VP 10-017, MM-Elastomer
002 002 Wearing due to sea water and sand Ceramium
003 003 Destructive test VP 10-500
004 004 Pending peeling test according to "Trietsch" MM-Elastomer
005 005 Test of the compression-shear-strength after injection MM-metal UW
006 006 Microscope photographs, Direct-MM-Bonding, bonding on contaminated surfaces, pressure tight tests MM-metal oL-steelceramic
007 007 The corrosion-chemical behaviour of PolymerMetals in combination with casting materials MM-metal SS-steelceramic, MM-metal SQ, MM-metal SS-steel 382, MM-metal SS-steel, MM-metal UW, Ceramium, MM-metal S-steel
008 008 Repair of a shaft with PolymerMetals MM-metal SS-steelceramic, MM-metal SS-steel 382, MM-metal SS-"product group", Ceramium, Molymetall
009 009 Compressive strength, Brinell hardness & bending strength MM-metal SS-steel 382
012 012 Pressure tightness test MM-metal UW
013 013 Wear tests MM-metal SS-steelceramic, Ceramium
014 014 Wear resistance Ceramium
015 015 Compression strain test MM-Elastomer
016 016 Sample applications PolymerMetals
017 017 Elimination of oil leaks from electrical devices like transformers, shunt reactors, transducers, etc. MM-metal oL-steelceramic, MM-Elastomer
018 018 Adhesion test MM-metal SS-steel
019 019 Injection of Polymermetal MM-metal SS-steel 382, MM-metal SS-steel, Ceramium
020 020 Repair of a shaft with PolymerMetals (short version) MM-metal SS-steelceramic, MM-metal SS-steel 382, MM-metal SS-"product group", Ceramium, Molymetall
021 021 - -
022 022 Scanning electron microscope records PolymerMetals
023 023 Comparison compressive strength MM-metal SS-steel 382, MM-metal SS-steel
024 024 Long-time test at high pressure / Deformation under load (creep characteristics) MM-metal SS-steel 382
025 025 Examination of Technical Properties of Sealium at high humidity Sealium
026 026 Adhesion & elasticity MM-Elastomer 95
027 027 Examination of shearing strength MM-metal SS-steel 382
028 028 Surface preparation before the coating of hydraulic rams Molymetall
029 029 Pressure tight test at low temperatures MM-metal SS-steelceramic
030 030 High stress due to temperature, chemicals (aggressive lye) and erosion affecting at the same time Ceramium

The above list will be added by further information from time to time. Visit this website again at a later time, please.
MultiMetall® • PolymerMetall® • Ceramium® • Molymetall® • Sealium® • XETEX® • the MetalExistenceCompany®